EMS39-GCU-Manual-Auto - Electronic Monitoring Solutionz

Home 02

Manual & Auto Start Controllers

EMS39 Generator Controller Unit

EMS39 is an integrated Genset controller which incorporates full Engine protection, LCD display of engine temperature, oil pressure, battery volts, speed and genset hours. It provides manual start and stop buttons, autostart, and controls excitation of the battery charging alternator.

OVERALL SIZE
100mm x 120mm x 22mm

PANEL CUTOUT SIZE
92mm x 92mm

WEIGHT
100g

PRODUCT HIGHLIGHTS
TECHNICAL SPECIFICATIONS
SIMILAR PRODUCTS
EXPANSION MODULES

KEY FEATURES	BENEFITS
An integrated Genset controller	Integrated Controller to protect Engine & battery Charging Alternator with in field editable Configuration parameters using PUSH Button
LCD display of engine temperature, oil pressure, battery volts, speed and Engine Run hours, provides manual start and stop buttons
Controls excitation of the battery charging alternator.
Scheduler to periodically start the genset to keep site batteries charged.
Support outputs to tell the BMS system of the alarm that caused the genset to be shut down.

FEATURES	SPECIFICATIONS
Overall Dimensions	100 x 120 x 22mm
Mounting Hole	92 x 92mm
IP rating	IP66 front, IP55 rear
Supply Voltage	6V to 32V DC Nominal 12V or 24V Automotive
Speed Input Sensitivity	100-350 Volts Pk
Speed Sensing Options	50/60Hz AC
Input Frequency Range	10Hz - 5KHz
Speed Display Options	RPM/Hz
Displayed frequency Range	0 - 9999 RPM 0 - 99.9 Hz
Engine Hours	0 - 99999.9 Hours
Oil Pressure Range	500, 750, 1000 KPa
Engine Temperature Range	120°C, 150°C, 200°C
Battery Volts measurement	6 to 32 Volts
Set-up and Adjustment	All features can be adjusted using set-up buttons and LCD menu
Terminations	Screw less connections on rear

EMS324	EMS326	EMS361	EMS362

EMS363	EMS371	EMS353	EMS860

EMS08	EMS12	EMS18	EMS20	EMS23	EMS24
EMS30	EMS72	EMS315	EMS930	EMS931